The data below show calculated figures, not measured one.
Constant torque ≒ Stall torque x 1/6 |
| Example: |
 10.5 N・m(107.7kg-cm) in stall torque at Input Voltage 8.4V |
| 9.6 N・m(92.4kg-cm) in stall torque at Input Voltage 7.2V |
| 7.5 N・m(77.0kg-cm) in stall torque at Input Voltage 6.0V |
| 6.0 N・m(61.6kg-cm) in stall torque at Input Voltage 4.8V |
The operating speed and power vary with input voltage.
|
| Revolution Speed of horn at 60deg in input voltage 6.0V is 0.3/sec |
| PS050 may be mounted on over 3 to 4 meters class wingspan plane. |
| Dimensions L100ｍｍ W44ｍｍ H93ｍｍ Weight 290gr |
| The output shaft is supported by two large-diameter ball bearing. |
| JR connector is used. This can be also connected to FUTABA and other receiver. |
PS050 Large servo for R/C model
